Speed Lifting platform
4.4
Removing the vehicle
32750, EN - rev. 7, 2018-04
1
Make sure that there are no fastening arms and chassis clamps
mounted on the lifting platform, refer to the Instruction manual
for the Speed Draw aligner
2
Lower the lifting platform. Regarding operation of the power
unit, refer to the Instruction manual for the external power unit.
Note! The lifting platform will stop automatically at a preset height about
150 mm (6 in) above the floor. To lower the lifting platform below this
point, refer to the Instruction manual for the external power unit.
3
Make sure that the lifting platform is lowered to its lowest
position.
4
Lower the lifting pads to the lowest position.
5
Fold the lifting arms along the platform by rotating them
horizontally so that they are placed alongside the lifting platform.
6
Roll off the vehicle from the lifting platform.
Car-O-Liner Group AB
33