Operation; General - Car-O-Liner Speed Instruction Manual

Speed Lifting platform

4 Operation

4.1

General

32750, EN - rev. 7, 2018-04
IMPORTANT! It is the responsibility of the owner to ensure that the
equipment has been installed as specified in the instructions provided. It is
also the owner's responsibility to ensure that the lift is inspected in
accordance with current and local regulations before it is used.
The Speed Lifting platform is inspected and checked prior to leaving the
factory to guarantee consistent quality and maximum reliability.
The lifting platform is suitable for most passenger cars and light vehicles.
The vehicles can easily be rolled over the lifting platform without using
ramps which simplifies setting up vehicles. When the lift is in use, the
vehicle should be entirely supported by the lifting platform. Do not lift one
end of the vehicle while the other end is resting on the floor.
WARNING! Always be extremely careful when working with jacks or
hydraulic equipment. Risk for falling or flying objects.
IMPORTANT! The lifting platform should not be used for anything other
than vehicle repairs.
WARNING! Never use B68 Sill lift in combination with draw aligner. Risk
of material damage and personal injuries.
WARNING! Before lowering the lifting platform, make sure that the
immediate area is cleared. Keep feet away. Risk for crushing injuries.
IMPORTANT! The B68 Sill lift is desigend for panel beating and
mounting/demounting jobs only and must never be used in combination
with chassis clamps.
WARNING! The edge of the front wheels (or heaviest axle) must never
exceed the edges of the lifting platform.
Car-O-Liner Group AB
25