Image Industries Smartweld SW1200 Operation Manual page 11

Section 2
handling Instructions
Mass of the SW1200 and its various parts and correct methods of handling them, e.g. by fork-lift or crane. Unit SHOULD NOT
be moved with gas cylinders. Detach and move gas cylinders separately.
Caution When Moving
1 Lifting Eye
2 Lifting Forks
Use lifting eye or lifting forks to move unit.
If using lifting forks, extend forks beyond
opposite side of unit.
Locate unit near correct input power supply.
Special installation may be required
where gasoline or volatile liquids are present. See NeC Article 511 or CeC Section 20.
Installation
11
& Set Up