Getting Started With Autoguidance - Case IH VISION PRO Manual

Introduction to the AFS Pro 1200

GETTING STARTED WITH AUTOGUIDANCE

1. Setup your Field Information and Vehicle / Implement.
Press the Operations Screen
and select your Grower,
Farm, Field, Crop, and
Task; select your vehicle,
implement, and vehicle
implement configuration.
2. Record your field boundary and swath type.
Select the Run Screen
that contains your
3D Map User Defined
Windows (UDW).
Record your vehicle path information:
Boundary
PAN
ZOOM IN
3. Engage Autoguidance.
Press the Engage Autoguidance
button on the Top Bar, or
press the Engage Autoguidance
button on the MultiFunction
handle, to begin operation.
Press the Vehicle and Implement Settings button on
the top tool bar and select one of the menu cards –
Settings, Diagnostics or Productivity to observe and
set the tractor functions.
To create implement configurations, go to:
Vehicle Settings
Vehicle Settings
Vehicle Settings
Vehicle Settings
Vehicle Settings
Vehicle Settings
Vehicle Settings
Compass
Swath
Management
ROTATE
ZOOM OUT
Guidance Engage Button Status
Display
™
Vehicle Settings
Vehicle Settings
Center on Vehicle
Boundary Line
Active Swath
Autoguidance conditions
met; Autoguidance is
ready to engage.
Manual control of steering.
One or more reasons that
guidance cannot
be engaged.
9
Vehicle Settings Vehicle Settings
Select your guidance and
GNSS configuration.
To create implement
configurations, go to:
Vehicle Settings
Vehicle Settings
Vehicle Settings
Vehicle Settings
Vehicle Settings
Autoguidance is
currently active and
steering the vehicle.
Autoguidance
has not yet
been activated.
Vehi