Inserting/ Changing Batteries; Setting Date & Time; Applying The Cuff - inventum BC03 Instruction Manual

1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. mmHg unit
5. Measured pulse
6. Pulse icon
7. Number of memory space
8. Inflate/deflate arrow
9. Change battery icon
10. Cardiac arrhytmia icon
11. WHO classification

4 | inserting/ changing batteries

• Remove the battery compartment cover (left side of
the unit).
• Insert two 1,5 V AAA batteries (Alkaline Type LR 03).
Make absolutely sure that you insert the batteries
with the correct polarity as marked. Do not use
rechargeable batteries.
• Replace the battery cover carefully.
If the change battery icon
measurement is no longer possible and you must
replace all the batteries.
note: Batteries containing pollutant substances are
marked as follows: Pb = Battery contains lead,
Cd = Battery contains cadmium, Hg = Battery contains
mercury.
is displayed,
5 | setting date & tiMe
It is vital to set date and time. Only this way is it
possible to save and subsequently retrieve your
measured values with the right date and time. Time
is shown in 24 hour format.
note: if you hold down "M", you can set the values
faster.
• Press " " and "M" simultaneously. The month
starts flashing. Using the "M" button, set the month
1 to 12 and confirm with "
• Set the day, hour and minute and confirm in each
case with " ".

6 | applying the cuff

32
".