Saving, Retrieving And Deleting Results; Troubleshooting; Cleaning & Care - inventum BC03 Instruction Manual

9 | saving, retrieving and deleting
results
• The results of each successful measurement are
stored together with date and time. With more than
60 items of measured data, the earliest items of
data measured are lost.
• In order to retrieve measurement results again,
press the memory button "M". The instrument first
displays the number of memory spaces occupied and
then automatically switches to the last saved test
result. If you continue pressing the memory button
"M", the last results in each case are measured and
displayed with date and time.
• You can clear the memory by holding down the
memory button "M" for 3 seconds.

10 | troubleshooting

In case of faults, the "EE" message appears in the
display. Error messages can occur when
• the inflation pressure is higher than 300 mmHg;
• the blood-pressure value is unusually high or low;
• you move or talk during the measurement, (in
addition to "EE", the cardiac arrhytmia icon
appears in the display);
• inflation takes longer than 30 seconds;
In the above cases, you must repeat the measurement.
Make sure that you do not move or talk. Re-insert the
batteries if necessary, or else replace them.
11 | cleaning & care
• Clean your blood pressure computer carefully only
with a slightly moistened cloth.
• Do not use detergents or solvents.
• On no account must you immerse the computer
in water, otherwise liquid can enter it and cause
damage.
• Always store the blood pressure monitor in the
storagecase.
35