Troubleshooting; About Blood Pressure - inventum BC16 Instruction Manual

Troubleshooting

Error messages can occur when
• the blood-pressure value is unusually high or low („EE" appears in the display),
• you move or talk during the measurement („EE" appears in the display),
• the cuff tube is not properly inserted („E1" appears in the display),
• inflation takes longer than 20 seconds („E1" appears in the display),
• the inflation pressure is higher than 300 mmHg („E2" appears in the display),
• an error occurs when storing the measured values („E3" appears in the display).
In the about cases, you must repeat the measurement. Make sure that the cuff tube is properly inserted
and that you do not move or talk. Put the batteries back in if necessary, or else replace them.

About Blood Pressure

The World Health Organization (WHO) and National High Blood Pressure Education Program
Coordinating Committee have developed a blood pressure standard, according to which areas of
low- and high-risk blood pressure are identified. This standard, however, is a general guideline as
individual's blood pressure varies among different people and different age groups...etc.
It is important that you consult with your physician regularly. Your physician will tell you your normal
blood pressure range as well as the point at which you will be considered at risk.
51