To Place A Transition Effect Between Scenes - Sony DCR-IP5 MovieShaker v3.1 Operating Instructions Manual

To place a transition effect between scenes

You can add an effect, such as a cross-fade or wipe effect, on a Transition
palette of the Storyboard to provide an interesting transition from one scene
to another.
1
Click the "Transition" button.
The Transition tray appears.
Transition palette
2
Click on the desired transition pattern.
The Transition preview monitor shows the contents of the transition.
Check how a scene shifts to another.
3
Set the duration of the transition by dragging the Transition
time slider.
The possible transition time is between 1 and 5 seconds.
The contents of the transition for only the set length of time are
displayed on the Transition preview monitor. Use this to check the
duration of the transition.
"Transition" button
Transition preview monitor
Trash Transition
Transition time slider
Continued
31