Sony DCR-IP5 MovieShaker v3.1 Operating Instructions Manual page 32

4
Drag the transition you want to place on the Storyboard.
5
Drop it on the Transition palette of the Storyboard.
The transition is placed on the Transition palette.
z Hint
As you drag a transition over a chosen Transition palette of the Storyboard, the palette
is highlighted to indicate placement. Use the indication to guide placement.
Notes
• You cannot place a transition on a Transition palette if its preceding or subsequent
Scene palette contains no scene.
• If you drop a transition on the Transition palette of the Storyboard which already has
the transition, the existing transition is overwritten by the new one.
• If you select one scene on the Storyboard to rearrange the order, its preceding and
subsequent transitions are automatically removed.
• A movie file (with or without transitions) captured from a MICROMV device
recorded in widescreen mode (aspect ratio 16:9) is exported to a MICROMV device
with an aspect ratio of 16:9. Its preceding and subsequent transitions are also
exported with an aspect ratio of 16:9.
To remove a transition
To remove a transition from the Storyboard, drag and drop it in the Trash in
the MovieShaker window. You can also remove a transition by clicking it and
pressing the Delete key. Note that if you remove a transition, the scenes
before and after the transition are not removed.
32