Sony DCR-IP5 MovieShaker v3.1 Operating Instructions Manual page 30

2
Drop it on a Scene palette of the Storyboard.
The clip is placed on the Scene palette of the Storyboard.
z Hints
• As you drag a scene over a chosen Scene palette, the palette is highlighted (or a
vertical marker appears between the palettes) to indicate placement. Use this
indication to guide placement.
• You can also simultaneously place more than one clip on the Scene palettes. The
scenes appear in the order in which the clips are placed on the Clip tray.
To select more than one clip at the same time, click on the desired clips while
pressing the Ctrl key. To select a sequential block of clips, click on the first clip, and
then click on the last clip while pressing the Shift key. All clips between (and
including) the first and last clips are placed on the Scene palettes in the order they
appeared on the Clip tray.
Note
When you use a large size clip or more than one clip at the same time, it may be time-
consuming.
To rearrange the order of scenes
You can rearrange the order of scenes on the Storyboard by dragging and
dropping them.
To remove a scene
To remove a scene from the Storyboard, drag and drop it in the Trash in the
MovieShaker window. You can also remove a scene by clicking it and
pressing the Delete key.
You can also remove more than one scene at the same time. To select a
sequential block of scenes, click on the first scene, and then click on the last
scene while pressing the Shift key.
z Hint
By inserting your own narrations, such as explanations or comments, etc., you can
make your movie even more effective. Use the Timeline to insert a narration into a
movie. For further information, see the on-line help.
30