Hotpoint Ariston SL B24 AA0 Operating Instructions Manual page 21

en
releasing the opening tab.
3. Wash the filter under running water, taking
care that the jet of water is not too strong.
4. Hold it so that the water flows parallel to its
folds.
5. Let it dry at room temperature until all of it's
parts are thoroughly dry.
6. Re-place the Pure Clean Hepa 13 filter,
paying attention to the positions of the
notches.
7. Fit the air grill into its housing until it clicks
into place.
To clean the dust compartment filters (38):
8. Press the dust-compartment opening button
(13) to open the dust compartment (14).
9. Remove the dust container (39).
10. Release the opening tab and then remove
the Pure Clean Hepa 13 filter, pre-filter (41)
and filter protection grill (40).
11. When cleaning the filter protection grill,
remove any dust/powder residues with a
small brush. If needed, use a damp soft
cloth.
12. Clean the pre-filter by washing it under
running water, taking care that the jet of
water is not too strong. Allow to dry.
13. Wash the Pure Clean Hepa 13 filter under
running water, taking care that the jet of
water is not too strong.
14. Hold it so that the water flows parallel to its
folds.
15. Let it dry at room temperature until all its
parts are thoroughly dry.
Make sure all its parts are thoroughly
dry before replacing them.
16. Fit the pre-filter into the special indentation
of the Pure Clean Hepa 13 filter, locking both
filters in place using the protection grill.
17. Fit the pre-filter, Pure Clean Hepa 13 filter
and protection grille assembly onto the dust
container, paying attention to the positions of
the notches, until it clicks into place.
18. Re-place the dust container into the dust
compartment.
the appliance is equipped with a safety
device that
compartment lid from closing unless the dust
container has been correctly installed. Do not
force the dust bag lid to close it and make sure
20
prevents the dust
all the parts are in the correct position to allow
lid closure.
19. Close the dust compartment lid until it clicks
into place.
attaCHMeNtS
The attachments can either be supplied as
standard features (based on the model) or be
purchased separately from Hotpoint authorised
centres.
Before changing an attachment, during
maintenance, disconnect the plug from
the electrical socket. Do not use aggressive
substances or abrasive materials to clean the
appliance, its internal parts and attachments.
Make sure the appliance is thoroughly dry
before using it again.
Standard/Carpet brush (K)
The standard/carpet brush (1) is suitable for
vacuuming hard and smooth floors as well
as carpets on a daily basis. Use the bristle-
adjustment pedal (2) to clean:
Hard floors
Carpets
To clean the plastic parts of the standard/carpet
brush, remove the brush from the metal extension
pipe (8) and wipe with a dry or slightly damp soft
cloth. To clean the bristles, remove any dirt using,
if needed, the precision nozzle (26).
Parquet brush (L)
The Parquet brush (3) is suitable for vacuuming
delicate areas such as wooden floors. The special
natural bristles enable you to use on very delicate
surfaces without harm. To clean the plastic parts
of the Parquet brush, remove the brush from the
metal extension pipe (8) and wipe with a dry or
slightly damp soft cloth. To clean the bristles, suck
up any dirt using the precision nozzle (26).
turbo brush (M)
The Turbo brush (4) is ideal for the in-depth
vacuuming of short-pile carpets and removing
pet hair. The rotation of the brush is operated
by the vacuum cleaner's suction power.To clean
the plastic parts of the Turbo brush, remove the
brush from the metal extension pipe (8) and wipe
with a dry or slightly damp soft cloth. Remove any