Installation; Handling And Moving The Boiler; Installation Of The Air Filter And Filter Matting - Hamworthy VARMAX 120 Installation, Commissioning And Servicing Instructions

4. INSTALLATION

4.1. Handling and moving the boiler

DANGER:
WARNING :

4.2. Installation of the air filter and filter matting

WARNING:
protective
label
figure 2 - Air filter
- Remove the protective "air intake" label.
- Insert the air filter and attach it to the boiler
using the 4 screws supplied with the filter.
14.09.2020
Manipulation of the boiler using a hoist requires the use of a frame
(not supplied). This is COMPULSORY.
The following indication is applicable only for the 525 and 600 kW
models.
Before unpacking: the use of the pallet truck is provided on the side
only.
After unpacking: it is recommended to use 2 pallet trucks, one at the
front and the other at the back.
If connecting CHIMNEY B23 or B23P, it is COMPULSORY to fit the air
filter supplied with the boiler.
air filter
U0502530-#
VARMAX - Installation, Use and Maintenance
Models 120 to 320:
Models 390 to 600:
figure 3 - Filter matting
All models:
- Insert the rectangular filter matting between the
filter's protective grille and the mounting (see
opposite).
Ensure that the link between both ends of the
matting is under one of the mountings.
Models 390 and 600:
- Insert the square filter cloth on the back gate of
the filter.
U0038318-B
mountings
U0024791-B
19 / 156