Table of Contents
Advertisement
OPERATION GUIDE
Connecting the decoder
If you have a VAST decoder then you'll only need to connect one of the coaxial cables from the
Maxview dish. Leave the other one disconnected.
You'll also need to connect the satellite decoder to your TV. There are two methods of connection.
Preferred method:
Using the supplied HDMI lead, connect from the HDMI socket on the back of the satellite decoder to
the HDMI socket on the back of your TV.
Plug in the supplied HDMI cable on the SatKing decoder and connect the other end of the HDMI
cable to your TV's HDMI socket
Alternative method (if you do not have HDMI sockets on your TV):
Using the supplied AV cable connect the colour coded video connections on the back of the satellite
decoder to the corresponding video connections on the back of your TV.
Connect the supplied AV cable to the RED, WHITE and YELLOW sockets on the SatKing decoder and
connect the other end of the cable to your TV
16
CRANK UP NZ INSTRUCTIONS MASTER.indd 16
17/09/2013 13:01
Advertisement
Table of Contents
