Table of Contents
Advertisement
5. Place the Base Plate over the Coupler Bush. Point the arrow to the rear of the vehicle. Mark the
four fixing holes. Drill four 2.5mm pilot holes or use a bradawl. With four No10 screws fix the
Base Plate to the ceiling.
6. Take the Dish Direction Unit and turn the azimuth lock lever to the red position to release the
brake. Locate the Dish Direction onto the Coupler Bush and use three M4 screws fix it in place.
Azimuth lock lever
Red
= Unlocked
Green
= Locked
(safe to travel)
CRANK UP NZ INSTRUCTIONS MASTER.indd 13
NOTE:
REAR OF VEHICLE
ALIGN THE ARROWS
17/09/2013 13:01
13
Advertisement
Table of Contents
