Table of Contents
Advertisement
Selecting an Installation Location.
Positioning the Antenna Unit and Handle Assembly.
Decide where you wish to mount your satellite system, taking into account obstacles both on the
roof and inside the vehicle. The system MUST BE pointing towards the rear of the Vehicle.
• Check for obstructions such as roof lights and vents
• Check for electrical cables beneath screw fixing points
• Check the coaxial cables will reach the satellite receiver (your dealer can supply extended cables)
• Do not allow the dish to overhang the edge of the vehicle
• Clearance around antenna system when in use is shown with reference E
• Ensure adequate clearance of the handle assembly from cupboard doors and light fittings
E
B
C
CRANK UP NZ INSTRUCTIONS MASTER.indd 7
A
F
D
G
Travelling
direction
Product
dimensions:
A: 117cm
B: 17cm
C: 49cm
D: 85cm
E: 125cm
F: 5cm
G: 16cm
7
17/09/2013 13:01
Advertisement
Table of Contents
