Table of Contents
Advertisement
4. Fix satellite dish to Antenna Arm using M6 Button Head Screws, M6 Nuts and 6mm Plastic
Washers. The 65cm and 85cm satellite dishes have different fixing hole positions.
Therefore 4 of the holes will be unused.
5. Remove all tools, packaging and obstructions from roof.
6. Finally, carefully remove
the green transit tape
from Antenna Unit in 2
places.
The satellite system
install is now complete.
Caution
Replace Nylon locking nuts if they have been removed more than twice. The locking action
of the Nylon becomes less effective if repeatedly assembled and disassembled.
CRANK UP NZ INSTRUCTIONS MASTER.indd 15
15
17/09/2013 13:01
Advertisement
Table of Contents
