Eterna SFLWW9 Safety And Installation Instructions

LAMP REPLACEMENT:
LED non replaceable.
Technical information:
SFLWW9 9 x LED 350mm strip output - 2W
9 x LED 350mm total circuit wattage (with driver) - 2.80W
SFLWW15 15 x LED 550mm strip output - 3.3W
15 x LED 550mm total circuit wattage (with driver) - 4.38W
SFLDR36 12V 36W driver
EVENTUALLY, YOU MAY WANT TO REPLACE THIS PRODUCT:
When your product comes to the end of its life or you choose to update or upgrade it by replacing
it, please do not dispose of it with your normal household waste and please recycle where facilities
exist. When you need to dispose of this fitting you can check with your retailer or local authority
for suitable options. New regulations require the recycling of Waste from Electrical and Electronic
Equipment (European "WEEE Directive" effective August 2005—UK WEEE Regulations effective 2nd
January 2007). Environment Agency Registered Producer: WEE/GA0248QZ.
IF YOU EXPERIENCE PROBLEMS:
If your product is defective or develops a fault, please return it to the place where you bought it.
You can call our helpline for advice. The helpline will gladly give advice on any aspect of any Eterna
Lighting product but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
110923-SM
HELPLINE:
• T: 01933 673 144
• F: 01933 678 083
• E: sales@eterna-lighting.co.uk
Visit our website:
www.eterna-lighting.co.uk
SAFETY AND INSTALLATION INSTRUCTIONS
Pack contents:
1 x LED strip light (SFLWW9/15)
1 x 350mm link cable
1 x Butt connector
2 x Surface mounting clips
2 x Horizontal mounting clips
Model:
SFLWW9 & SFLWW15
LED Super Flat Strip Light – 350mm / 550mm
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE USING YOUR NEW FITTING
PLEASE RETAIN FOR FUTURE REFERENCE
FOR USE
WITH
ETERNA
DRIVER
(SFLDR36)