Advertisement
Eventually, you may want to replace this light fitting
When your light fitting comes to the end of its life or you choose to update or upgrade it by
replacing it, please do not dispose of it with your normal household waste, please recycle where
facilities exist. When you need to dispose of this fitting, check with your retailer or local authority
for suitable options. New regulations require the recycling of Waste from Electrical and Electronic
Equipment (European "WEEE Directive" effective August 2005—UK WEEE Regulations effective 2nd
January 2007). Environment Agency Registered Producer: WEE/GA0248QZ
IF YOU EXPERIENCE PROBLEMS:
If your light is defective or develops a fault, please return it to the place where you bought it. You can call our
Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product but may not
be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
Issue 090507PA
T: 01933 673 144 • F: 01933 678 083 • E: sales@eterna-lighting.co.uk
For answers to frequently asked questions (FAQs)
and other information visit our website:
www.eterna-lighting.co.uk
HELPLINE:
SAFETY AND INSTALLATION INSTRUCTIONS
GU10 SPOTLIGHTS
Models:
SL1WH, SL1CR, SL1BN
SL2WH, SL2CR, SL2BN
SL3BWH, SL3BCR, SL3BBN
SL3PWH, SL3PCR, SL3PBN
SL4WH, SL4CR, SL4BN
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING YOUR NEW FITTING
PLEASE RETAIN FOR FUTURE REFERENCE
Advertisement
Table of Contents
Related Manuals for Eterna SL1WH
Summary of Contents for Eterna SL1WH
- Page 1 If your light is defective or develops a fault, please return it to the place where you bought it. You can call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product but may not be able to give specific instructions regarding individual installations.
- Page 2 fit for the purpose for which you have intended CLEANING: This product is designed for permanent connection it. Eterna Lighting cannot accept any liability for 1. Choose the location for your new light fitting to fixed wiring: this should be either a suitable loss, damage or premature failure resulting from Clean this light fitting only with a soft dry cloth.
Need help?
Do you have a question about the SL1WH and is the answer not in the manual?
Questions and answers