Williams Sound BAT KT7 Quick Setup Manual

Charger for pocketalker 2.0

BAT KT7

Charger for Pocketalker 2.0

Product Description

The BAT KT7 is designed for charging the Williams AV

Pocketalker 2.0 when used with NiMH batteries. It comes

with adapters for various international and US outlets.

WARNING!

BEFORE CONNECTING THE CHARGER TO THE

POCKETALKER, MAKE SURE THE POCKETALKER

HAS NIMH RECHARGEABLE BATTERIES

INSTALLED (NOT ALKALINE).

QUICK SETUP GUIDE

MAN 200F

Table of Contents

Do you have a question about the BAT KT7 and is the answer not in the manual?

Page 1 BAT KT7 Charger for Pocketalker 2.0 QUICK SETUP GUIDE Product Description The BAT KT7 is designed for charging the Williams AV Pocketalker 2.0 when used with NiMH batteries. It comes with adapters for various international and US outlets. WARNING! BEFORE CONNECTING THE CHARGER TO THE...
Page 2 BATTERIES ONLY - Williams AV P/N BAT 022 (or equivalent) AAA size NiMH, 1.2 VDC Rechargeable batteries). Preparing the BAT KT7 charger for use Choose the prong adapter for your country of use. 1. Slide the prong adapter onto to the top of the power supply.
Page 3 To remove the adapter: 1. Hold down the button in the middle of the prong adapter. 2. While holding down the button, slide the prong adapter off of the device the opposite direction as if you were putting it on. Charging the Pocketalker It will take about 16 hours to fully charge the batteries .
Page 4 Charging wall outlet Port Warranty A652 The BAT KT7 is covered by a 90 day warranty. Customer Service If you experience difficulty with your system, call Toll-Free for Customer Assistance: 1-800-328-6190 (U.S.A.) or +1 952 943 2252 (Outside the U.S.A.)