Williams Sound CHG 200A User Instructions

User Instructions
Battery Charger, Model CHG 200A
Rechargeable Batteries
We recommend using only
BAT 026 AA Ni-Cad batteries.
These batteries will last about 45-
50 hours per charge when used
with Williams Sound Receivers.
Batteries from other suppliers may
provide shorter operating life.
Using The CHG 200A
Battery Charger
1) Plug the CHG 200's power
supply into the Power Jack on
the back of the unit and a stan-
dard AC wall outlet.
2) Wrap the power cord around
the Cord Hook (See Figure 1.)
This will minimize strain on
the cord and jack and insure
that the power cord is not
detached during charging.
MAN 070A
3) Make sure the units to be
charged are turned OFF.
4) Place the units in the slots so
that the CHG 200's Charging
Pins and unit's side panel con-
tacts are coupled.
(See Figure 1.)
!! WARNING !!
DO NOT ATTEMPT TO
RECHARGE DISPOSABLE
BATTERIES!
The batteries may heat up and
burst, causing possible injury and
damage to the equipment.
Avoid shorting the plus and minus
battery terminals together with
metal objects. Battery damage
and burns can result!
Use only Williams Sound supplied
chargers and batteries!
Williams Sound
Helping People Hear
®