Related Manuals for Williams Sound BAT KT7
Summary of Contents for Williams Sound BAT KT7
- Page 1 BAT KT7 (USA/Canada) BAT KT8 (International) Chargers for Pocketalker 2.0 QUICK SETUP GUIDE BAT KT7 (U.S.A. and Canada) BAT KT8 (International) MAN 200C...
- Page 2 Product Description The BAT KT7 and BAT KT8 are designed for charging the Williams AV Pocketalker 2.0 when used with NiMH batteries. The BAT KT7 is the USA and Canada version with U.S.
- Page 3 Preparing the BAT KT7 charger for use 1. While holding the power supply, pry out the prongs with a finger. 1. Pry prongs out 2. Continue pulling until the prongs stop. 2. Pull until it stops...
- Page 4 Preparing the BAT KT8 charger for use Choose the prong adapter for your country of use. 1. Place the prong adapter on the power supply as shown, sliding it down (right) as far as possible. 1. Insert prongs 2. Pivot the adapter up/to the left until it clicks into place. 2.
- Page 5 3. Once the adapter is free, release the tab. 3. Release Charging the Pocketalker WARNING! BEFORE CONNECTING THE CHARGER TO THE POCKETALKER, MAKE SURE THE POCKETALKER HAS NiMH RECHARGEABLE BATTERIES INSTALLED (NOT ALKALINE). 1. Open the Pocketalker battery compartment and set the battery switch to the NiMH position (Figure 1).
- Page 6 -It will take approximately 16 hours to fully charge the batteries . Figure 2: BAT KT7 Charging Connection PockeTalker 2.0 USB charging cord Power Supply...
- Page 7 Input 100-240 VAC, 50-60 Hz, 0.5-0.3 A Output 5 VDC, 2.0 A Warranty The BAT KT7 and BAT KT8 are covered by a 90 day warranty. Customer Service If you experience difficulty with your system, call Toll-Free for Customer Assistance: 1-800-328-6190 (U.S.A.) or...
- Page 8 EU Authorized Representative: Emergo Europe Prinsessegracht 20 2514 AP The Hague The Netherlands info@williamsav.com / www.williamsav.com 800-843-3544 / INTL: +1-952-943-2252 ©2019 Williams AV LLC MAN 200C...
Need help?
Do you have a question about the BAT KT7 and is the answer not in the manual?
Questions and answers