Table of Contents
Advertisement
9) Turn meter over and place register on bayonet at an approximate 45° angle as shown in the image
on the left.
Secure register in place by turning clockwise as shown in the image on the right.
Have fun and we wish you the best of luck.
Note: The meter will be shipped with a locking
pin for the register. To remove the register and
shroud, use a punch or awl to drive the locking
pin into the register shroud. The locking pin will
not be used for the competition.
Advertisement
Table of Contents
Need help?
Do you have a question about the Multi-Jet and is the answer not in the manual?
Questions and answers