Download Print this page

Insert The Chamber Into Strainer; Insert The Chamber And Strainer Into The Meter Body - Master Meter Multi-Jet Instruction Manual

Table of Contents

Insert the Chamber into Strainer.

Insert the Chamber and Strainer into the Meter Body. Be sure to line up the regulator with the hole

in the meter body. If the O-Ring is not properly seated, or if it is missing, the meter will leak.

NOTE: The strainer/chamber O-Ring is not

needed for competition. If you receive this

gasket with your meter, you may discard the

gasket.

Table of Contents

Do you have a question about the Multi-Jet and is the answer not in the manual?