Tx Ic Lga Rework Jig And St-25 Stencil; Rj-100 Rework Jig And St-34 Stencil - Nokia 3155 Service Tools

3155/3155i (RM-41), 3152 (RM-61)
Service Tools
RJ-65 TX IC LGA Rework Jig and ST-25 Stencil
The ST-25 stencil allows rework on LGA-type components that do not have pre-tinned
pads. The Tx RF IC requires the use of this stencil. The stencil is designed to specifically fit
the IC pad configuration and dimensions while the rework jig fits the physical dimension
of the IC.
Note: Used in conjunction with the SPS-1 Paste Spreader.

RJ-100 Rework Jig and ST-34 Stencil

The ST-34 stencil allows rework on LGA-type components that do not have pre-tinned
pads. The stencil is designed to specifically fit the N7200 pad configuration and
dimensions. The RJ-100 fits the physical dimension of the N7200.
Note: Used in conjunction with the SPS-1 Paste Spreader.
Page 10
©2005 Nokia Corporation
Company Confidential ISSUE 1 07/2005