3155/3155i (RM-41), 3152 (RM-61)
Service Tools
CA-56RS RF Test Cable
The CA-56RS test cable is used with Module Jig (MJ-57) for RF engine testing and
tuning. This cable is 10 cm long. It snaps directly on the mobile terminal's RF connector
and converts the output to an surface mounting assembly connector.
CA-52PS DC Service Cable
The CA-52 is used together with JBV-1 Docking Station and DA-47 Docking Station
Adapter for EM calibrations. This cable is for a smaller Dynamo DC-jack.
DA-47 Docking Station Adapter
The DA-47 works in conjunction with the JBV-1 Docking Station and the FPS-8, FPS-10
Prommer Boxes to allow calibration, tuning, and software flashing of the mobile
terminal. It supports the LYNX battery interface, which does not require BTEMP. The DA-
47 also has a built-in RUIM card reader.
Page 4
©2005 Nokia Corporation
Company Confidential
ISSUE 1 07/2005