Lrk-2 / 3 Lga Component Rework Kits 1 & 2 - Nokia NHL-10 Service Tools

CCS Technical Documentation
LRK-2 / 3 LGA component rework kits 1 & 2
Type designator
LRK-2 (0273645) Kit 1
MJS-76
SES-2
SPS-2
LRK-3 (0273646) Kit 2
SES-2
SPS-2
Rework procedure
Due to the large mechanical tolerance of the power amplifiers the following procedure is nec-
essary:
1 Put the power amplifier into the MJS-76 rework jig. The PA should be placed in
the best fit location which is determined by placing the PA in the largest location
first, and if this is to large, re-position it to the next location. This should be car-
ried out until the best fit location is found.
28
Description Part code
LGA Re-work 0770417
Jig
Stencil 0770415
Spreader 0770471
Stencil 0770415
Spreader 0770471
COMPANY CONFIDENTIAL
Copyright © 2003 Nokia. All Rights Reserved.
NHL-10
Service Tools
ISSUE 2 01/2004