Rework Jigs And Stencils; General Devices - Nokia RM-509 Service Manual

RM-509; RM-510; RM-511
Service Devices and Service Concepts
2. Assemble the display module to the UI flex in the supporting frame.

Rework jigs and stencils

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-509; RM-510; RM-511. For the correct use of the service devices, and the best effort of
workbench setup, please refer to various concepts.

General devices

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-509; RM-510; RM-511. For the correct use of the service devices, and the best effort of
workbench setup, please refer to various concepts.
Issue 2
RJ-230
RJ-230 is a soldering jig used for soldering and as a rework jig for the
engine module.
AC-35
Universal power supply for FPS-21; included in the FPS-21 sales
package.
Input 100V...230V 50Hz...60Hz, output voltage of 12 V and output
current up to 3 A.
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Soldering jig
Power supply
Page 2 –7