3155/3155i (RM-41), 3152 (RM-61)
Reassembly
Reassembly Instructions
1. Attach the TX Compression Gasket
A TX compression gasket is needed only if a new unassembled D-cover is used.
Stick the TX compression gasket to the unassembled D-cover.
2. Insert the D-cover UIM Card Trap
a. Insert the guide pin into the slot of the D-cover.
b. Insert the bottom pin and snap the upper guide pin into the D-cover slot.
Page 4
©2005 Nokia Corporation
Company Confidential
ISSUE 1 07/2005