Reassembly Instructions; Insert The Dc Jack; Insert The Camera Flash; Insert The Bt Antenna - Nokia 6265 Reassembly

6265/6265i/6268 (RM-66)
Reassembly

Reassembly Instructions

1. Insert the DC Jack

Using a CA-44 adapter, gently press the DC-Jack into the D-cover assembly. Make sure
the adapter is not plugged into an electric source.

2. Insert the Camera Flash

Gently place the camera flash into its retainers and snap it into place using your fingers.
Make sure not to damage snap in the process.

3. Insert the BT Antenna

Using tweezers, gently place the BT antenna into the D-cover making certain the
assembly snaps into place. Note the snap located just above the vertical tab.
Caution: Do not damage the metal antenna springs.
Page 4
CA-44 adaptor
Snap above vertical tab
©2005 Nokia Corporation
Company Confidential Issue 1 11/2005