42
Basic operations
Switching input signals
To select an input signal, do either one of the following:
• Press
• Press the Menu button on the front panel.
• Drag the OSD menu up from the bottom-center of the screen.
• Press More to access Picture settings under other input sources. Refer to
settings on page 54
• The users can enable the Eye-Care on the OSD menu.
Eye-Care solutions
Blue light with wavelengths under 455 nm could affect vision and age the eyes. Eye-Care
solution is designed for eyesight protection: the display provides proprietary eye-care
technology with zero-flicker performance and ultra-low blue light emission, preventing
eyestrain, eye fatigue and macular degeneration caused by extended sessions in front of a
display. In addition, advanced anti-glare screen treatment minimizes distracting reflections
and glare for optimal productivity and comfort.
Suggestions for long-term use of the display:
• Rest your eyes for 10 minutes after 30 minutes of continuous use.
• For every 20 minutes of display viewing, look into the distance for 20 seconds.
• When your eyes get sore and strained, close your eyes for a minute and then roll your eyes in
all directions.
To activate the smart eye care solution:
• Enable the Eye Care function under General.
• Go to Device > Display > Eye care option.
Menu
Standard
On-body detection Activate the PIR motion sensor to detect human body and trigger
Auto brightness
on the remote control.
for more information.
Set as default value once Eye-Care function is enabled.
the eye care protection mechanism.
Panel backlight will be adjusted automatically according to the
ambient light.
Description
Picture