Securing The Wine Conditioning Unit In The Niche - Miele KWT 6322 UG Operating And Installation Instructions

Installation
Securing the wine conditioning unit
in the
niche
 The wine conditioning unit must pro-
trude evenly from the furniture doors
by 1/16" (2 mm).
 Open the appliance door.
 Remove cover  and first screw the
wine conditioning unit to the adjacent
furniture unit at the top left .
The wine conditioning unit will align it-
self to the left side of the niche. The
front of the appliance door must be
flush with the furniture front.
 Put cover  back into place.
70
 Screw the wine conditioning unit at
the bottom right and left to adjacent
furniture units.
 If necessary, a fourth screw can be
used in the top right-hand hinge to
secure the wine conditioning unit.
To do so, dismantle the door and then
fit this extra screw.
 Close the appliance door and check
that the side edges of the appliance
door are aligned with the side walls of
the wine conditioning unit.
 Now connect the wine conditioning
unit to the power supply.