Advertisement
5600(A) Series
Mortise Exit Devices
Installation Instructions
2
Pre-Installation
Unreinforced Door or Frames
Doors and Frames with walls having a structural thickness (metal skin plus reinforcement, or solid hardwood) to engage
less than (3) full screw threads, are considered unreinforced for hardware.
Unreinforced Doors: Use SNB (sex nuts and bolts).
Reinforced Door or
Frame engages at least
(3) screw threads.
Unreinforced Frames: Use Blind Rivet Nuts.
Note
Recommended fasteners for unreinforced openings
are not necessarily supplied by Corbin Russwin, Inc.
Door must
swing freely
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2012, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Reinforcement
Door skin
Door must not
be warped
Door must
not bind
3
Minimum Door Stile
4-1/2 in. (114 mm)
Door and Frame must
meet structural and
dimensional specifi-
cations on exit device
template(s) for door
and frame preparation.
Door must
not sag
FM168 12/20
Advertisement
