Accessories - Bryant 619AHB Installation Instructions Manual

ACCESSORIES

The system is shipped with the following accessories (see Table 1). Use
all of the installation parts and accessories to install the system. Improper
installation may result in water leakage, electrical shock and fire, or cause
the equipment to fail. Keep the installation manual in a safe place and do
not discard any other accessories until the installation work has been
completed.
Table 1 — Accessories
NAME
Installation Manual
Seal (for cooling
and heating models)
Mounting Plate
50 2
100 4
mm inch
150 6
RECOMMAND
Anchor
Mounting Plate
Screw
Remote Controller
Battery
Remote Controller
Holder (optional)
Remote Controller
Holder Screw
(optional)
Small Filter
(Must be installed
on the back of the
main air filter by an
authorized
technician during
unit installation)
II619AHB-02
SHAPE QUANTITY
2-3
1
BUBBLE
LEVEL 1
100 mm 50 50 100
4 inch 2 2 4
LIQUID GAS
5-8
(depending
on models)
5-8
(depending
on models)
1
Boost
2
1
2
1-2
depending
on the model
Specifications subject to change without notice.
Table 2 — Accessories
NAME SHAPE
Liquid
Side
Connecting
Pipe Assembly
Gas Side
Magnetic Ring and
1 2 3
Clamp (if supplied
refer to the wiring
diagram to install it
to the cable.
QUANTITY (PC)
1/4in(Φ 6.35)
These parts must
3/8in (Φ 9.52)
be purchased
separately.
3/8in (Φ 9.52)
Consult the dealer
1/2in (Φ12.7)
about the proper
pipe size of the
5/8in (Φ16)
unit purchased.
3/4in (Φ19)
Varies by model
Pass the cable
through the
Magnetic Ring hole.
3