Advertisement
Leica Viva – Bluetooth Connection to Ohmex SonarMite Echo Sounder
F6 Page
Tick the box Log auto points box.
You'll probably want to stick with
the defaults on this page (shown
opposite).
3.4
If you choose to log points at a
higher rate than every 1 second
you'll probably end up with too
much data and the job will need to
be exported to CSV in Leica Geo
Office rather than directly on
board the CS15 controller.
F3 config..
Set up the AutoPoints display
something like the page opposite.
It is good to include the Moving
antenna ht and the number of
Msd auto points you have
3.5
surveyed.
The Annotation 1 will show the
measured depth.
OK twice to return to the Survey
screen.
You are now ready to start
3.6
surveying AutoPoints when you
press OK to Start
Leica UK Technical Support Group
Advertisement
