Temperature Adjustment - Electrolux IK2065RE Instruction Booklet

Hide thumbs

Table of Contents

Available languages

Use

Energy savings tips:

• The room temperature affects the appliance's con-

sumption of electric current.

Therefore, avoid placing it near sources of heat or in

direct rays of sunlight.

If possible, choose a place that has a room temperatu-

re below the climate class indicated.

• Make sure there is sufficient ventilation.Do not cover

the ventilation slits.

• Do not cover the ventilation slits.

• Do not set a temperature lower than necessary.

Control screen

A - Mains operation indicator

B - Ein/Aus (ON/OFF) button

C - Temperature setting button (.+. = warmer)

D - Temperature indicator

E - Temperature setting button (.-. colder)

Using the refrigerator compartment

Starting the appliance

• Plug it into the socket.

• Press the EIN/AUS (B) (ON/OFF) button. The mains

operation indicator (A) lights up.

• Press one of the .+. (C) or .-. (E) buttons. The tempera-

ture indicator goes into operation and indicates the set

nominal temperature.

If the regulator is set at a higher level, wait about 4 hours

before loading the appliance.

The right temperature for loading food products to be coo-

led is +5°C.

• Let hot food products cool to room temperature before

placing them in the refrigerator.

• Put liquids inside covered containers only.

• Avoid keeping the refrigerator open unless it is neces-

sary.

• Clean the condensate regularly (see Defrosting and

Cleaning).

• Too thick a layer of frost causes needless consumption

of electric current. Small deposits of frost can be remo-

ved from time to time with a plastic scraper.

F - SUPERFROST indicator

G - SUPERFROST button

H - SUPERCOOL indicator

I - SUPERCOOL button