Winch; Jack; Wooden Bunks (Advanced Tec); Rollers (Advanced Tec Icatch) - BRP SEA-DOO ADVANCED TEC 2010 User Manual

4. Install lens then secure it using re-
taining screws.
NOTICE
Do not overtighten retain-
ing screws.
Front Positioning Light Bulb
Replacement
1. Remove the lens retaining screws.
smo2010-004-013_a
POSITIONING LIGHT REMOVED FOR
CLARITY PURPOSE
1. Lens retaining screws
2. Remove lens from housing.
3. Remove burnt light bulb by pulling it
off its socket.
smo2010-004-014_a
POSITIONING LIGHT REMOVED FOR
CLARITY PURPOSE
1. Light bulbs
4. Install a new light bulb by pushing it
completely into its socket.
5. Install lens then secure it using re-
taining screws.
NOTICE
Do not overtighten retain-
ing screws.
https://www.boat-manuals.com/

Winch

Winch Inspection
Inspect gears, bushings and strap for
wear or damage.
Winch Lubrication
Apply a thin coat of multipurpose
grease to the gearing teeth and pivot
points. Rotate handle to distribute
grease evenly.
Lubricate ratchet pivot point with light
oil.

Jack

Jack Lubrication
Clean grease fitting, then lubricate us-
ing multipurpose grease. Rotate han-
dle to distribute grease evenly.
Lubricate handle pivot point and wheel
axle with light oil. Wipe excess oil and
rotate parts to distribute oil evenly.
smo2010-003-006_a
1. Grease fitting
Wooden Bunks
(ADVANCED TEC)
Check wooden bunks carpet condition
and wood hardness.
Rollers (ADVANCED TEC
iCatch)
Check rollers for looseness wear,
cracks or damage.
_______________
MAINTENANCE PROCEDURES
39