BRP SEA-DOO ADVANCED TEC 2010 User Manual page 20

TRAILER SET-UP
smo2010-003-025_b
1. Winch arm
2. Winch arm adjustment bolt
3. Winch support
4. Front u-bolt nuts
4. Tighten u-bolt
27 N•m ± 3 N•m.
5. Tighten winch arm adjustment bolt
to 27 N•m ± 3 N•m.
Bunks
The wooden bunks are preset to suit
all Sea-Doo personal watercraft (PWC)
hull designs, however, a universal
rule applies: bunks must lean square
against a plain area of the hull.
Make sure the bunks are well posi-
tioned.
smo2010-003-026_a
A. Plain area of hull
1. Bunk square with hull
______________
18
nuts
https://www.boat-manuals.com/
to