TRAILER SET-UP
Fitting the Trailer to the
Watercraft (ADVANCED
TEC iCatch)
The iCatch system must be adjusted
specifically to the personal watercraft
(PWC) hull type.
The iCatch system must be used along
with the iCatch bow cup available at
an authorized Sea-Doo personal water-
craft (PWC) dealer.
WARNING
iCatch mechanism must be specif-
ically adjusted to the personal wa-
tercraft (PWC) model and used
exclusively with the iCatch bow
cup. An incorrect adjustment may
cause the iCatch mechanism to
inadequately secure the personal
watercraft (PWC) to the trailer.
There are three parameters to set
on the iCatch system to fit the listed
Sea-Doo personal watercraft (PWC)
models:
– iCatch housing angle
– iCatch support height
– Bumper position.
Also, rollers contact and tongue weight
must be adjusted if necessary. Tongue
weight is adjusted by changing the
iCatch support and/or axle position on
the frame.
For proper adjustment guidelines, re-
fer to the following tables and proce-
dures.
______________
12
https://www.boat-manuals.com/