Table of Contents
Advertisement
[1]
[2]
[3] [3]
[1]
[2]
Step7:
1. Rotate [1] (the rear wheel seat) upward to the proper position.
2. Rotate [2] (the rear suspension components) in rear direction to the
proper position.
3. Put [1] (the rear wheel seat) down slowly into the right position. (Note: [4]
(the suspension pivot) needs to be aimed at [5](suspension pivot slot), [3]
(the rear suspension pivot locating rod) needs to be aimed at [6](the rear
suspension pivot locating slot))
[2]
[1]
9
Step6:
1. Put [2] (M8*16 shim) on
[3] (steering column).
2. Use G (M8 spanner) to fix
[1] (M8 nut) on [3]
(steering column).
( clockwise )
[4]
[4]
[3]
[3]
[6] [6]
[5]
[5]
Step8:
[2]
1. Use G (M8 spanner)
to loosen [1] (M8 nut)
[1]
2. Take off [2] (M8*22
shim).
[1]
[2]
1
2
A
Step9:
1. Use G (M8 spanner) to loosen [1] (M8 nut) on A (rear axle), and take off
[2] (M8*22 shim).
2. Insert A (rear axle) into [3](the rear wheel seat), and keep the same
length on both sides.
[1]
[2]
[4]
[3]
[5]
Step10:
1. Install [4](the rear wheels)into both sides of [5](the rear axle). (Note: the
convex side of the rear wheel is inside, it will fit with the gear box)
2. Put two [2](M8*22 shims) on the outside of the rear wheels.
3. Use G (M8 spanner) to securely fix them with [1](M8 nut). (clockwise )
4. Press [3] (the wheel cover) firmly into the corresponding position on [5]
(the rear wheel).
A
[2][1]
[3]
[2] [1]
[4]
[5]
[3]
10
Advertisement
Table of Contents
