Download Print this page
Lean Cars CH9959 Installation And Operation Manual

Lean Cars CH9959 Installation And Operation Manual

Ride on car

Advertisement

Quick Links

CH9959
Ride On Car
Installation and operation manual
Forward and backward function
Fast and slow switch
Remote manual function
2.4G remote control function
Music. Bluetooth connection for music. Radio. USB
Executive standard: EN71 and EN62115 ;
Assembly By Adult Only
Please follow real product, Photo for reference only

Advertisement

loading

Summary of Contents for Lean Cars CH9959

  • Page 1 CH9959 Ride On Car Installation and operation manual ● Forward and backward function ● Fast and slow switch ● Remote manual function ● 2.4G remote control function ● Music. Bluetooth connection for music. Radio. USB Executive standard: EN71 and EN62115 ;...
  • Page 2 35KG is the maximum weight for 1 rider (combined)
  • Page 3 Specification Item Batteries Motor 6V/12V 3-8years 37 – 96 month Max Weight 35KG 1479*659*590mm Dimension High speed:3.9KM/H Low-speed:2.2KM/H Speed Play Time 1-2 hours / recharger time 8-12hours Charger Out Put DC6V/12V...
  • Page 4 35KG M4*14mm Positioning tube of the rear axle of the tug Padded screw Headstock Chimney Chair Front wheel cover L / R Rear wheel cover Fender L/R Trailer Trailer rear axle Tug connection Body connector...
  • Page 5 Adjust the steering bracket. Secure the steering bracket Upward down...
  • Page 6 Clip body connection into the body. Screw in...
  • Page 7 Put the gasket, front wheel, gasket and nut into the front axle in turn. Fix the nut with the plate hand, and then fix the wheel cover on the wheel. Put the rear wheel, gasket and nut into the front axle in turn. Fix the nut with a wrench, and then fix the wheel cover on the wheel.
  • Page 8 Put the fender L / R on both sides of the body Screws for assembling steering wheel. Fixing by nuts Hand up, up and down steering rods when assembling the headstock...
  • Page 9 Remove the motor wire from the pocket by hand. Clip the table and chair into the body and fix them with screws Clip the chimney into the body...
  • Page 10 Clip connection piece of rear bucket into the body. Screw down. Put the rear axle of the tug into the tug. Then put the gasket, locating tube, gasket, front wheel, gasket and nut in turn.
  • Page 11 Combine the car and the tug together. The large body connection and the tug connection are fixed with screws M8 * 65 and M8 nuts...
  • Page 12: Function Introduction

    Function introduction Power switch FAST SLOW Bluetooth function Forward. Stop. Back Fast and slow switch Bluetooth function: Digital Electricity Display MODE Functional description MODE:Switching mode.1.Music.2.Radio.3.Bluetooth /V-: Trigger the last song, reduce it by volume Trigger the next song, add it by volume. /V+: Trigger pause/playback;...
  • Page 14 The charging hole is located in the front of the seat. Insert the Q head of the charger into the charging hole. Insert the other end into the socket...
  • Page 15 The battery on the vehicle is not replaceable. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
  • Page 16 CHOKING HAZARD-Small parts. Not for children under 3yrs. To reduce the risk of injury, adult supervision is required.Never use in roadways. near motor vehicles , on or near steep inclines or steps,swimming poors or other bodies of water; always wear shoes, and never allow more than one rider Not to be used in traffic.