Table of Contents
Advertisement
Installation Steps
[2]
[1]
[1]
[2]
7
Preparation before
installation:
Take out all components from
the packing box and
the interior of the car body.
Turn the car body upside down
on a clean desktop or level
surface.
Step1:
Use H (M5spanner) to loosen
upside
[1] (M5 nut), and move [2]
(Steering connection) out from
the hole on [3](the iron part of
[3] [3]
the front axle).
Step2:
1.[ 1]Rotate the front
axle L 180 degree
counter-clock-wise.
2.[ 2]Rotate the front
axle R 180 degree
clockwise.
[2]
[3]
[1]
[1]
[2]
[3]
[1]
[2]
Step5:
1. Rotate [1] (the front wheel seat) upward about 50 degrees.
2. Rotate [2] (the front suspension components) in front direction to the proper
position.
3. Put [1] (the front wheel seat) down slowly into the right position. (Note: [3]
(the suspension pivot) needs to be aimed at [8] (suspension pivot slot), [4]
(the suspension pivot locating rod) needs to be aimed at [7] (the suspension
pivot locating slot), [6] (the steering connecting hole)needs to be aimed at [5]
(steering column))
Step3:
Use H to fix [2](Steering
connection) and[1] (M5 nut)
on [3] (the iron part of the
front axle).
Step4:
Use G (M8 spanner) to loosen
[1] (M8 nut) on [3] (steering
column), and take off [2] (M8*16
shim).
[6]
[5]
[3]
[4]
[7]
[8]
8
Advertisement
Table of Contents
