Table of Contents
Advertisement
HRA536 - HRD535 - HRD536
[2]
- IGNITION COIL / CONTROL ARM / CARBURETOR
SPARK PLUG CAP
Measure the resistance of the spark plug cap.
[3]
c. Adjustment
IGNITION COIL AIR GAP
[1]
Adjustment is required only when the ignition coil or the flywheel has been removed.
1. Loosen the screw and stud bolt of the ignition coil.
2. Insert a long thickness gauge or piece of paper of the proper thickness between the
3. Push the ignition coil firmly toward the flywheel and tighten the screw and the stud bolt.
[1] GAUGE
[2] IGNITION COIL
[3] FLYWHEEL
Standard resistance value
HRA536 - HRD536/K1/K2
HRD535/K1/K2
ignition coil and flywheel. Both gaps should be adjusted simultaneously. Avoid the
magnet part of the flywheel when adjusting.
Specified clearance
- 54 -
4 - 5 kΩ
0.2 Ω
0.2 - 0.6 mm
Hide quick links:
Advertisement
Table of Contents
