Advanced Bionics Naida CI Q90 Acoustic Earhook Instructions For Use Manual page 7

• Remove and insert another Wax Guard if it fits loosely.
• Discard the Wax Guard after use.
Removing & Inserting Wax Guard on the xReceiver
Unit
Use the empty Removal End of the Wax Guard to
remove the used Wax Guard from the Sound Outlet on
the xReceiver Unit by:
• Inserting the Removal End into the Sound Outlet until
the rim of the Wax Guard is touching the rim of the
Sound Outlet.
• Then slowly pulling the Wax Guard straight out.
Use the Insertion End of the Wax Guard to insert the
new Wax Guard onto the Sound Outlet on the xReceiver
Unit by:
• Pressing the Insertion End straight into the opening
of the Sound Outlet until the Outer Ring of the Wax
Guard sits flat on the Sound Outlet.
• Then pulling the Wax Guard straight out.
CLOSED DOME or POWER DOME
Bottom
Opening
6
Closed
Power