Advanced Bionics Naida CI Q90 Acoustic Earhook Instructions For Use Manual page 10

• Align the pointed end of the T-Mic 2 / Earhook
removal tool with the hole on the processor that
contains the pin holding the Naída CI Q90 Acoustic
Earhook on the Naída CI Q90 Sound Processor.
• Gently press the tool in the hole, pushing the pin out
the other side.
• The pin does not need to be removed from the
Naída CI Q90 Sound Processor. As long as the tool
is pushed in flush on one side of the Naída CI Q90
Sound Processor, the pin should be displaced enough
to adequately remove the Acoustic Earhook.
• Remove the tool from the Naída CI Q90 Sound
Processor.
• Gently grasp the Acoustic Earhook at the top near
where it connects with the Naída CI Q90 Sound Pro-
cessor and pull forward until it is separated from the
Naída CI Q90 Sound Processor.
Retention Hook
Attaching the Retention Hook to the xReceiver Unit
• Grasp the xReceiver Unit in one hand.
• With the other hand, align the retention hook so that
the loop is in front of the xReceiver Unit, and the
retention hook points forward, away from the Sound
Processor.
• Gently slide the loop of the retention hook into the
xReceiver Unit until the retention hook covers the
dash.
9