Setup Instructions - Advanced Bionics Naida CI Q90 Acoustic Earhook Instructions For Use Manual

programmed properly to delivery acoustic amplification
through the Acoustic Earhook before first use.
Set-up Instructions
The Acoustic Earhook has been provided to you partially
assembled. Before using the Acoustic Earhook you
must ensure:
1.
A Wax Guard (e.g. Cerustop) is properly attached to
the Sound Outlet.
2.
A Closed Dome or Power Dome is attached to the
Sound Outlet over top of the Wax Guard.
3.
The Acoustic Earhook is connected to your Naída CI
Q90 Sound Processor.
4.
Your cochlear implant professional has programmed
your Naída CI Q90 Sound Processor for use with
your Naída CI Q90 Acoustic Earhook.
WAX GUARD
Removal
End
When using the Wax Guard, it is important that you:
• Do not pry or twist the Wax Guard.
• Do not force the Wax Guard into the Sound Outlet.
• Never reuse a Wax Guard.
Outer Ring
Insertion
End
5