Table of Contents
Advertisement
en Cleaning and servicing
Setting
Lighting
Operating mode on start-
up
Night-time dimming
Brand logo
Fan run-on time
Factory settings
Factory setting (may vary according to model)
1
11.2 Changing the basic settings
Requirement: The appliance must be switched off.
Press and hold for approx. 3 seconds.
1.
Press
to confirm the notification on the display.
2.
a The first basic setting will now be shown on the dis-
play.
12 Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
12.1 Cleaning agents
Only use cleaning products that are suitable for the dif-
ferent surfaces on your appliance.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Do not use harsh or abrasive detergents.
▶
Do not use oven cleaner.
▶
Appliance front
Surface
Aluminium
Stainless steel
16
Selection
Switched on during
1
operation
Switched off during oper-
ation
1
Heating functions
AutoPilot
1
Off
On
1
Display
Do not display
1
Recommended
Minimum
Restore
1
Do not restore
Cleaning agent
Soapy water
Mild window-cleaning agent
Soapy water
Special stainless steel cleaner
Use the control ring to change the basic setting.
3.
Press
.
4.
a The next basic setting will appear on the display.
Use the
button to go through the basic settings,
5.
and make changes as required using the control
ring.
Press and hold the button for approx. 3 seconds to
6.
save your changes.
Discarding changes to the basic settings
Press
.
▶
a All your changes will be discarded and not saved.
11.3 Changing the time
You can change the time by going to the basic set-
tings.
Press
to switch off the appliance.
1.
Press and hold for approx. 3 seconds.
2.
3.
Press
to confirm the notification.
a The "Language" setting appears on the display.
Press
.
4.
a The "Time" setting appears on the display.
Use the control ring to change the time.
5.
Press and hold for approx. 3 seconds to confirm
6.
the time.
Do not use limescale remover on the door handle or
▶
control panel, as it may leave permanent staining.
Do not use corrosive or harsh cleaning products or
▶
products containing chlorine.
Salts are very corrosive and can cause rusting. Re-
▶
move the remnants of any acidic sauces or salted
food from the cooking compartment immediately
once it has cooled.
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Information
After cleaning the surface, dry it with a soft
cloth.
Use a soft window cloth or a lint-free mi-
crofibre cloth to apply a mild window-clean-
ing agent to the appliance's aluminium front
and wipe it horizontally across the surface
without applying pressure.
After cleaning the surface, dry it with a soft
cloth.
To prevent corrosion, remove any patches of
limescale, grease, starch or albumin (e.g.
egg white) on stainless steel surfaces imme-
diately.
Advertisement
Table of Contents
