Gear Position Display - Honda Pioneer SXS500M 2018 Owner's Manual

Gear Position Display

Gear position indicator
The gear position indicator shows the gear position when the
ignition switch is in the ON (q) position.
AT mode:
The indicator displays N for neutral, R for reverse, and D for drive.
MT mode:
The indicator displays: N for neutral, R for reverse, and 1, 2, 3, 4, 5
for the five forward gears.
"–" will be displayed on the gear position indicator when the
transmission is not shifted into gear properly. Before driving, check that
the gear position is properly displayed on the gear position indicator.
If the gear position indicator shows "–" and blinks, turn the ignition
switch to the OFF (w) position, and then turn it back to the ON (q)
position again. If the gear position indicator still shows "–" and
blinks, see your dealer.
4WD indicator
This indicator will be on when the 4WD mode engages (page 36).
gear
position
indicator
Indicators & Displays
4WD indicator
Instruments & Controls 31