Rear Final Gear Oil - Honda Pioneer SXS500M 2018 Owner's Manual

2018
Table of Contents

Advertisement

Rear Final Gear Oil

Oil Recommendation
API classification
type
viscosity (weight)
suggested oil
Checking Oil
Refer to Safety Precautions on page 91.
Check the rear final gear oil level every 1,800 miles (3,000 km) or
300 hours of operating your Honda SXS, and add if needed.
1. Park your Honda SXS on a firm, level surface.
2. Remove the oil filler cap.
3. Make sure the oil level is at the lower edge of the oil filler
inspection hole.
4. Apply a thin coat of grease to a new O-ring, and insert it into the
oil filler cap groove.
5. Install and tighten oil filler cap to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
RIGHT REAR
O-ring
126
Servicing Your Honda
GL-4 or GL-5 except oils labeled as
energy conserving on the circular
API service label
hypoid gear oil
SAE 80W-90
Honda shaft drive oil or equivalent
oil filler cap
lower edge of
oil filler
inspection hole

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents