Internal Diagnostics; Accessing The Internal Diagnostics; Procedure - Kodak X-Omat 5000 RA PROCESSOR Diagnostics

Section 3: Internal Diagnostics

Accessing the Internal Diagnostics

Procedure

READY
DRYER SLEEP SELECT
TEMP CYCLE
1 2
∧ ∨
CYCLE
INFO SETUP OPTIONS
USAGE DIAG
VERSION
5B6342 – January 1996
MORE GO TO
SETUP
3 4 CANCEL
REQUEST
MORE DONE/
RETURN
DONE/
RETURN
SW MORE DONE/
RETURN
[1] Press "GO TO SETUP" from the main menu.
[2] Enter the access code. If the customer:
• has not changed the code, it is 4213.
• has changed the code, see the Adjustments
and Replacements, Publication No. 5B6340,
Electrical, Resetting or Bypassing the Access
Code.
[3] Press "MORE".
[4] Press "INFO".
[5] Press "DIAG" to display the first diagnostic menu.
Advance to the next page to see the
3 diagnostic menus.
In addition to accessing the first diagnostic menu
from this screen, you can access additional
screens that will enable you to access more
information about the PROCESSOR. Select:
• "USAGE" to access information about the
type and quantity of film and chemicals used
in the PROCESSOR
• "SW VERSION" to access the software
version number for the following programs for
the 5000 and 6000 BOARDS:
– Boot program
– Main program
• "MORE" to access the total number of hours
the:
– PROCESSOR has been energized
– DRIVE MOTOR has been energized
• "DONE/RETURN" repeatedly to return to the
main menu

Internal Diagnostics

21