Warnings - Kodak X-Omat 5000 RA PROCESSOR Diagnostics

Warnings

Error Error
Code Description
E128 Top cover not in
place
E129 Tanks currently being
filled
E130 Replenish pumps
disabled
E132 Developer under set
temperature
E133 Developer over set
temperature
E134 Dryer under set
temperature
E137 Film accumulator
LED error
E141 Low developer tank
level
E142 Low fixer tank level
5B6342 – January 1996
Possible
Malfunction
When this error occurs, the following functions are disabled:
• film transport
• film accumulation
The TOP COVER is opened. Close the TOP COVER.
INTERLOCK SWITCHES S3
and S4
• MAGNETS
7000 BOARD
When this error occurs,
• the following functions are disabled:
– film transport
– film accumulation
• the following parts are disabled:
– RECIRCULATION PUMP
– 3 HEATERS
None
None
None
None
None
6000 BOARD
When this error occurs, the:
• RECIRCULATION PUMP is disabled
• temperature control for the fixer and developer is disabled
None
When this error occurs, the:
• RECIRCULATION PUMP is disabled
• temperature control for the fixer and developer is disabled
None
Action
Check S3 and S4. If necessary, install a new
SWITCH or MAGNET.
Install a new BOARD.
None. This message will clear automatically.
Use the KEYPAD to select either Automatic or
Flooded Replenishment to enable the PUMPS.
None. This message will clear automatically when
the developer reaches the setpoint temperature.
None. This message will clear automatically when
the developer reaches the setpoint temperature.
None. This message will clear automatically when
the DRYER reaches the setpoint temperature.
Check that no chemical deposits are on the
PROTECTIVE COVER for the BOARD.
De-energize and energize the PROCESSOR to
reset the:
• MICROPROCESSOR on the 5000 BOARD
• MICROPROCESSOR on the 6000 BOARD
Check the BOARD. Use the internal diagnostics. If
necessary, install a new BOARD.
None. This error will clear automatically when the
developer solution reaches the correct level.
None. This error will clear automatically when the
fixer solution reaches the correct level.
Error Codes
11